Hot Products
China Factory Suppliers - PSU DC 24V 800W Switch Mode Power Supply HX-800-24, High Efficiency & Stable Operation
HXFeatures
AC input wide range: 110/220V
OEM and ODM is welcome
Withstand 300VAC surge input for 5 seconds
Forced air cooling by built-in DC fan
High efficiency, long life and high reliability
100% full load aging test
Protections: Short circuit/ Overload/ Over voltage /Over temperature
2 years warranty
HXSpecifications
| Datasheet: | |||
| MODEL | HX-800-24 | HX-800-36 | |
| OUTPUT | DC voltage | 24V | 36V |
| Rated current | 33.3A | 22.2A | |
| Current range | 0-33.3A | 0-22.2A | |
| Rated power | 800W | 800W | |
| Ripple & noise | 240mVp-p | 300mVp-p | |
| Voltage adj range | 20.8~26.5V | 33~39.6V | |
| Voltage tolerance | ±1% | ±1% | |
| Line regulation | ±0.5% | ±0.5% | |
| Load regulation | ±0.5% | ±0.5% | |
| Setup, rise time | 200ms, 100ms | ||
| Hold up time | 20ms | ||
| INPUT | Voltage range | 180-264VAC | |
| Frequency range | 47-63Hz | ||
| AC current | 4.5A/230VAC | ||
| Inrush current | 60A/230VAC | ||
| Efficiency | >86% | >88% | |
| Leakage current | <3.5mA/240VAC | ||
| PROTECTION | Overload | 115-130% rated output power | |
| Over voltage | 115%-150% of voltage | ||
| Protection type: shut down o/p voltage, re-power on to recover | |||
| Over temperature | -30°C ~ +60°C | ||
| Protection type: shut down o/p voltage, recover automatically after temperature goes down | |||
| ENVIRONMENT | Working temp. | -20°C ~ +50°C | |
| Working humidity | 20%~90%RH non-condensing | ||
| Storage temp. | -30°C ~ +85°C | ||
| Storage humidity | 10%~90%RH | ||
| TEMP coefficient | ±0.05%/°C (0-50°C) | ||
| SAFETY | Safety standards | Compliance to EN55022:2006+A1:2007; EN55024; EN 60950; EN61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008 | |
| Withstand voltage | I/P-O/P:1500VAC, I/P-FG:1500VAC, O/P-FG:500VAC | ||
| Isolation res. | I/P-O/P, I/P-FG, O/P-FG: 100MΩ | ||
| OTHERS | MTBF | 197K hrs min. MIL-HDBK-217F (25°C) | |
| Dimension | 240*125*65mm (L*W*H) | ||
| Packing | 1.40kg/pc, 10pcs/ctn | ||
| Certification | CE/FCC/RoHS | ||
| NOTE | 1. All parameters NOT specially mentioned are measured at normal input, rated load and 25 °C of ambient temperature. | ||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||
| 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||
HXSize
HXWorkshop Production Line
HXFrequently Asked Questions
What is the AC input voltage range for the HX-800 power supply?
The HX-800 power supply supports a wide AC input range of 110/220V (with a working range of 180-264VAC) and can withstand a 300VAC surge input for up to 5 seconds.
What output configurations are available for the HX-800 series?
The series is available in two main models: the HX-800-24 (24V output, 33.3A rated current) and the HX-800-36 (36V output, 22.2A rated current), both delivering a total rated power of 800W.
What built-in protections does this power supply offer?
It features comprehensive safety protections, including Short Circuit protection, Overload protection (115-130% rated power), Over Voltage protection (115%-150%), and Over Temperature protection with automatic recovery.
How is the HX-800 power supply cooled?
The unit utilizes forced air cooling powered by a built-in DC fan to maintain optimal operating temperatures and ensure high reliability and long life.
Does the HX-800 comply with safety standards?
Yes, it complies with standard certifications including CE, FCC, and RoHS, and meets safety standards such as EN55022, EN55024, EN60950, and EN61000.
What is the warranty period and reliability rating?
The power supply comes with a 2-year warranty and has an MTBF (Mean Time Between Failures) rating of at least 197,000 hours under MIL-HDBK-217F standards at 25°C.