China 24V 800W Switch Mode Power Supply HX-800-24 - Factory Direct, Reliable Suppliers with High Efficiency and Protection Features
HXFeatures:
HXSpecifications
| Datasheet: | |||
| MODEL | HX-800-24 | HX-800-36 | |
| OUTPUT | DC voltage | 24V | 36V |
| Rated current | 33.3A | 22.2A | |
| Current range | 0-33.3A | 0-22.2A | |
| Rated power | 800W | 800W | |
| Ripple & noise | 240mVp-p | 300mVp-p | |
| Voltage adj range | 20.8~26.5V | 33~39.6V | |
| Voltage tolerance | ±1% | ±1% | |
| Line regulation | ±0.5% | ±0.5% | |
| Load regulation | ±0.5% | ±0.5% | |
| Setup, rise time | 200ms, 100ms | ||
| Hold up time | 20ms | ||
| INPUT | Voltage range | 180-264VAC | |
| Frequency range | 47-63Hz | ||
| AC current | 4.5A/230VAC | ||
| Inrush current | 60A/230VAC | ||
| Efficiency | >86% | >88% | |
| Leakage current | <3.5mA/240VAC | ||
| PROTECTION | Overload | 115-130% rated output power | |
| Over voltage | 115%-150% of voltage | ||
| Protection type: shut down o/p voltage, re-power on to recover | |||
| Over temperature | -30°C ~ +60°C | ||
| Protection type: shut down o/p voltage, recover automatically after temperature goes down | |||
| ENVIRONMENT | Working temperature | -20°C ~ +50°C | |
| Working humidity | 20%~90%RH non-condensing | ||
| Storage temperature | -30°C ~ +85°C | ||
| Storage humidity | 10%~90%RH | ||
| TEMP coefficient | ±0.05%/°C (0-50°C) | ||
| SAFETY | Safety standards | Compliance to EN55022:2006+A1:2007; EN55024; EN 60950; EN61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008 | |
| Withstand voltage | I/P-O/P:1500VAC, I/P-FG:1500VAC, O/P-FG:500VAC | ||
| Isolation resistance | I/P-O/P, I/P-FG, O/P-FG: 100MΩ | ||
| OTHERS | MTBF | 197K hrs min. MIL-HDBK-217F (25°C) | |
| Dimension | 240*125*65mm (L*W*H) | ||
| Packing | 1.40kg/pc, 10pcs/ctn | ||
| Certification | CE/FCC/RoHS | ||
| NOTE | 1. All parameters NOT specially mentioned are measured at normal input, rated load and 25 °C of ambient temperature. | ||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||
| 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||
HXSize
HXWorkshop Production Line
HXFrequently Asked Questions
What is the input voltage range supported by the HX-800 power supply?
The HX series power supply supports a wide AC input range of 110/220V (specifically 180-264VAC) and can withstand a 300VAC surge input for up to 5 seconds.
What safety protections are built into this power supply?
This unit features comprehensive protections including Short circuit, Overload (115-130% rated output power), Over voltage (115%-150% of voltage), and Over temperature (-30°C ~ +60°C) with automatic recovery features.
How is the cooling system for the HX-800 designed?
The power supply uses forced air cooling powered by a built-in DC fan to maintain optimal operating temperatures.
What certifications does the HX series power supply hold?
The HX series power supply is certified under CE, FCC, and RoHS standards, complying with international safety requirements like EN 60950 and EN55022.
What is the warranty and reliability rating for this product?
We offer a 2-year warranty for the HX series. It features high reliability with an MTBF (Mean Time Between Failures) rating of 197K hours minimum at 25°C.