Leave Your Message
China 24V 800W Switch Mode Power Supply - High Efficiency AC to DC Converter from Reliable Suppliers and Factory
Hot Products

China 24V 800W Switch Mode Power Supply - High Efficiency AC to DC Converter from Reliable Suppliers and Factory

Introducing our high-performance power supply, designed specifically for various devices, with outstanding features such as low ripple, minimal interference, exceptional efficiency, and stable operation. Manufactured in China by trusted suppliers, our factory ensures that every unit meets the highest standards of quality and reliability, This power supply is equipped with advanced safety features including output current limiting, short-circuit protection, overload protection, and overvoltage protection. Utilizing an efficient distillation circuit, it significantly enhances performance, achieving an efficiency rate between 85% and 93%. With a DC output range of 5V to 1000V, it is versatile enough to meet diverse application needs, Certified by European standards such as CE, RoHS, and FCC, our power supplies guarantee compliance with international regulations. Choose our power supply for a reliable and efficient solution backed by reputable Chinese manufacturers

    HX Features:

    AC input wide range: 110/220V
    OEM and ODM is welcome
    Withstand 300VAC surge input for 5 seconds
    Forced air cooling by built-in DC fan
    High efficiency, long life and high reliability
    100% full load aging test
    Protections: Short circuit/ Overload/ Over voltage /Over temp.
    2 years warranty

    HX Specifications

    Datasheet:
    MODEL HX-800-24 HX-800-36
    OUTPUT DC voltage 24V 36V
    Rated current 33.3A 22.2A
    Current range 0-33.3A 0-22.2A
    Rated power 800W 800W
    Ripple & noise 240mVp-p 300mVp-p
    Voltage adj range 20.8~26.5V 33~39.6V
    Voltage tolerance ±1% ±1%
    Line regulation ±0.5% ±0.5%
    Load regulation ±0.5% ±0.5%
    Setup, rise time 200ms, 100ms
    Hold up time 20ms
    INPUT Voltage range 180-264VAC
    Frequency range 47-63Hz
    AC current 4.5A/230VAC
    Inrush current 60A/230VAC
    Efficiency >86% >88%
    Leakage current <3.5mA/240VAC
    PROTECTION Overload 115-130% rated output power
    Over voltage 115%-150% of voltage
    Protection type: shut down o/p voltage, re-power on to recover
    Over temperature -30°C ~ +60°C
    Protection type: shut down o/p voltage, recover automatically after temperature goes down
    ENVIRONMENT Working temp. -20°C ~ +50°C
    Working humidity 20%~90%RH non-condensing
    Storage temp. -30°C ~ +85°C
    Storage humidity 10%~90%RH
    TEMP coefficient ±0.05%/°C (0-50°C)
    SAFETY Safety standards Compliance to EN55022:2006+A1:2007; EN55024; EN 60950; EN61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008
    Withstand voltage I/P-O/P:1500VAC, I/P-FG:1500VAC, O/P-FG:500VAC
    Isolation res. I/P-O/P, I/P-FG, O/P-FG: 100MΩ
    OTHERS MTBF 197K hrs min. MIL-HDBK-217F (25°C)
    Dimension 240*125*65mm (L*W*H)
    Packing 1.40kg/pc, 10pcs/ctn
    Certification CE/FCC/RoHS
    NOTE:
    • 1. All parameters NOT specially mentioned are measured at normal input, rated load and 25 °C of ambient temperature.
    • 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    • 3. Tolerance: includes set up tolerance, line regulation and load regulation.
    • 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

    HX Size

    Size Diagram of HX Power Supply

    HX Workshop Production Line

    HX Frequently Asked Questions

    What output models are available for the HX-800 power supply series?
    The HX-800 series is available in two output models: the HX-800-24 (which provides a 24V DC output at a rated current of 33.3A) and the HX-800-36 (which provides a 36V DC output at a rated current of 22.2A).
    What type of cooling system does the HX-800 power supply use?
    This power supply is designed with a forced air cooling system powered by a built-in DC fan, ensuring stable heat dissipation during full-load operations.
    What protections are built into this power supply?
    The HX-800 features multiple safety protections, including short circuit protection, overload protection (115-130% rated output power), over voltage protection (115%-150% of voltage), and over temperature protection.
    Can the output voltage of the HX-800 be adjusted?
    Yes, the output voltage can be adjusted. The voltage adjustment range is 20.8V to 26.5V for the HX-800-24 model, and 33V to 39.6V for the HX-800-36 model.
    What certifications and safety compliance does the HX-800 series hold?
    The HX-800 series is certified with CE, FCC, and RoHS. It complies with safety standards including EN55022, EN55024, EN60950, EN61000-3-2, and EN61000-3-3.
    What is the warranty period and reliability rating of the HX-800?
    The power supply comes with a 2-year warranty and features a high MTBF (Mean Time Between Failures) rating of 197K hours minimum under MIL-HDBK-217F standards at 25°C.